Power Conversions Pty Ltd

DC - AC sinewave inverter

True Mains Power from a Battery

Easy to use
High surge
Rugged and reliable
Safe - MEN compatible
Heavy duty construction
Efficient & silent operation
Fully isolated DC to AC output

Mains Power Anywhere

POWERSINE

SINEWAVE INVERTER

Why is a sinewave inverter better?

Electrical equipment is designed to operate from a sinewave mains power source.

Only a sinewave inverter generates mains type power with the correct peak and mean voltages guaranteeing reliable, optimum performance for electrical equipment.

A sinewave inverter ensures higher efficiency for the electrical system and extends the battery life.

Non-sinewave inverters produce incorrect voltages which may cause the connected equipment to have operating difficulties or not run at all.

Non Sinewave inverters produce high levels of harmonic distortion, which can cause electrical interference and audio hum as well as overheating the connected equipment

Don’t risk valuable electrical equipment

Equipment powered by a non sinewave power source may invalidate the equipment warranty.
Why compromise, when you can operate your equipment correctly with a PowerSine Inverter.

Total protection for the inverter and the connected appliance Inverter status display Customer support

* Input over & under voltage protection
* Reverse polarity protection
* Electronic current limiting
* Electronic short circuit protection
* Electronic overload protection
* Circuit breaker input & output protection
* On
* Overload
* Input under volts
* Input over volts
* Circuit breaker status
* 2 Year warranty
* Quality assured
* Australian designed and built, support is always close at hand.

Simple to use

Connect the inverter to a battery, switch on inverter and operate appliance as normal.

Electrical and Mechanical Specifications

PS 600i/12

PS600i/24

PS1000i/12

PS1200i/24

Input Voltage
( 10.5 - 16 Vdc ) 12Vdc or ( 21 - 32 Vdc ) 24 Vdc

Continuous Input Current
60 amp

30 amps

100 amps

60 amps

Output power ( Surge )
600watts (2400watts)

600watts (2800watts)

1000watts (3200watts)

1200watts (4000watts)

Output Voltage
240Vac +/- 3%

Output Frequency
50 Hz +/- 0.5%

Efficiency
94% peak, 80% at 10% load

Total Harmonic Distortion
Less than 5%

Load power factor
+/- 0.5

Isolation
2KVrms primary / secondary

Dimensions
(W) 320 mm x (H) 270 x (D) 360 mm ( Powder coated steel )

Weight
13 Kg

13 Kg

19.5 Kg

18.5 Kg

Temperature range
0 to 45 Degrees Celsius

Cooling
Natural convection

Input/Output connections
1 metre DC input cables and AC output socket

Click here to go back

Note: all ratings @ 25 degrees Celsius, nominal DC supply voltage & unity power factor.
Due to continual product development, these specifications are subject to change without notice.

Total protection for the inverter and the connected appliance	Inverter status display	Customer support
* Input over & under voltage protection * Reverse polarity protection * Electronic current limiting * Electronic short circuit protection * Electronic overload protection * Circuit breaker input & output protection	* On * Overload * Input under volts * Input over volts * Circuit breaker status	* 2 Year warranty * Quality assured * Australian designed and built, support is always close at hand.

	PS 600i/12		PS600i/24		PS1000i/12		PS1200i/24
Input Voltage	( 10.5 - 16 Vdc ) 12Vdc or ( 21 - 32 Vdc ) 24 Vdc
Continuous Input Current	60 amp		30 amps		100 amps		60 amps
Output power ( Surge )	600watts (2400watts)	600watts (2800watts)		1000watts (3200watts)		1200watts (4000watts)
Output Voltage	240Vac +/- 3%
Output Frequency	50 Hz +/- 0.5%
Efficiency	94% peak, 80% at 10% load
Total Harmonic Distortion	Less than 5%
Load power factor	+/- 0.5
Isolation	2KVrms primary / secondary
Dimensions	(W) 320 mm x (H) 270 x (D) 360 mm ( Powder coated steel )
Weight	13 Kg		13 Kg		19.5 Kg		18.5 Kg
Temperature range	0 to 45 Degrees Celsius
Cooling	Natural convection
Input/Output connections	1 metre DC input cables and AC output socket